CV STEAM CONDENSER FOR GAUGES

It is used for mounting instruments on steam lines. It is designed to replace the old “pig tail” siphon model, improving its purpose.

APM PULSATION DAMPER

When a manometer, transmitter or presotate must be installed in pressure lines with pulsating characteristics, the use of anABAC APM damper is convenient. This accessory eliminates unwanted oscillations or pulsations, allowing a good reading of the manometer while lengthening its useful life.

LP PRESSURE LIMITER

Device intended to protect pressure gauges, pressure switches, pressure transmitters and other critical and expensive instruments against accidental overpressures that could damage them.

VRL STANDARD CHECK VALVE

Prevent back flow, protecting solenoids, regulators and pumps. They retain pressure in hydraulic and pneumatic cylinders, etc. They have spring return and poppet closure with o’ring seal for smooth and reliable operation.

VRS SEVERE SERVICE CHECK VALVE

High flow check valve with poppet closure and spring return, specially designed for severe service, including CNG applications.

TP / TPM PURGADORES

ABAC traps are an economical means of venting gases and liquids, directly installed in any NPT threaded hole.

VAR STRAIGHT RELIEF VALVE

This model discharges excess pressure directly into the atmosphere through small re-routed channels in the body. The set point value is adjusted by means of the regulation screw, externally, without disassembling the valve.

VAA-D ELIMINATED RELIEF VALVE. DIFFERENTIAL SHUTTER

This valve is designed in such a way that, when the difference between inlet and outlet pressure exceeds the closing force made by the spring on the plug, the valve opens, allowing flow to the outlet connection. The flow through the valve increases proportionally to the increase in said pressure difference.

VAA-B ANGLED RELIEF VALVE. BALANCED SHUTTER

The design of this allvlo valve allows the set point value to not be affected by back pressure at the outlet.